ZTG00A40160E

Automatic Transfer Switch, ZTG, ZTG000A40160E
General Purpose Commercial and Industrial Automatic Transfer Switch
1600 A, 3 Pole, 277/480 V, 3 phase, 4 wire, 60 Hz (ZVC70)
ZTG - Open Transition Operation
Utility to Generator-Auto Transfer Application
NEMA 1 Enclosure (ZEC0CCGC)
Destination - North America Region, United States

Item # Qty Description Total Price
UL 1008 listed up to 480VAC at 50/60Hz
CSA C22.2 No. 178.1 certified up to 600 VAC at 50/60Hz
CCC certified
Seismic certified to IEEE-693-2005 at HIGH level with 2.5 amplification
factor
Seismic certified to IBC-2009 at Ip=1.5 for z/h less than or equal to 1
ISO 9001 certified manufacturing plant
Option Package: Standard-Open Transition (MSTD00G)
Standard Package- Open Transition-Utility to Generator Auto Transfer
Aux Contact-Source 2-Emergency position-Qty 1 (A3)
Aux Contact-Source 1-Normal position-Qty 1 (A4)
Microprocessor activated calibration feature (CAL)
Exerciser timer, with or without load (CDT/P)
Engine start relay - S.P.D.T. (E)
Event log of last 16 events (EL/P)
Adjustable under frequency sensor Source 2-Emerg (J1E)
Frequency indication on the controller (K/P)
LED Source 2 (Emergency) position indication (L1)
LED Source 1 (Normal) position indication (L2)
LED Source 1 (Normal) source availability indication (L3)
LED Source 2 (or Emergency) source availability indication (L4)
Engine start timer-adjustable up to 6s (P1)
Peak shave/remote load test/area protection-Relay S.P.D.T. -specified
voltaged displayed below (Q2)
Under voltage sensing-single-phase Source 2-Emergency (R2E)
In Phase Monitor between Source 1-Normal and Source 2-Emergency to
allow transfer with enable/disable (R50)
Microprocessor activated Commit/no commit on transfering to emergency
source with enable/disable (S13/P)
Retransfer to normal adjustable time delay (T)
Engine stop/cool adjustable cool down timer (U)
Voltage imbalance between phases -applies to 3-phase only (VI)
Adjustable time delay on transfer to emergency source (W)
Bypass transfer timer function (soft switch in controller) (YEN/P)
Test Switch - maintained Programmable in microprocessor (6/P)
Remote Load Test (Q2-120V)
Disconnect Source Voltage (DSL)